311 21 21 6% 24% 33% 12% 15% 25% 1% 746 1414 22145% 18 25 30 30 9 2815 41 1514 18 8% 31% 471 184 20 31% 471 184 20 234 2 834 6 16 152 33 97% 71% 152 33 31 14.50 21.00 162 3612 912 35% 56% 21% 23% 3% 214 1034 8 20 38 34 18 14.50 21.00 17 37 10 35% 56% 21% 23% 3% 21⁄2 1034 8 20 * Short Adjustment furnished unless otherwise specified. 5/8 74 34 18 34 18 34 1 Horse-Power of Belts Calculations based on Pulleys Running at 100 R. P. M. 24 1.10 1.70 2.30 2.90 5.2 3.4 6.35.0 10.0 6.3 12.6 18.8 22.0 25.1 28.3 31.4 34.5 25 1.20 1.80 2.40 3.00 5.5 3.6 6.65.2 10.5 6.6 13.1 19.7 22.9 26.2 29.5 32.8 36.0 39.3 26 1.20 1.90 2.50 3.105.7 3.7 6.8 5.4 10.9 6.8 13.6 20.4 23.8 27.2 30.6 34.1 37.5 40.9 27 1.30 1.90 2.60 3.20 5.9 3.9 7.15.7 11.3 7.1 14.1 21.2 24.7 28.3 31.8 35.4 38.9 42.4 28 1.30 2.00 2.70 3.30 6.1 4.0 7.3 5.9 11.7 7.3 14.7 22.0 25.7 29.3 33.0 36.7 40.3 44.0 29 1.40 2.10 2.80 3.50 6.3 4.1 7.6 6.112.17.6 15.2 22.8 26.6 30.4 34.2 38.0 41.7 45.5 30 1.40 2.10 2.90 3.60 6.5 4.37.9 6.3 12.6 7.9 15.7 23.6 27.5 31.4 35.3 39.3 43.2 47.1 31 1.50 2.20 3.00 3.70 6.8 4.4 8.1 6.5 13.08.1 16.2 24.4 28.4 32.5, 36.5 40.6 44.7 48.7 32 1.50 2.30 3.00 3.80 7.0 4.6 8.4 6.7 13.4 8.4 16.8 25.129.3 33.5 37.7 41.9 46.1 50.3 33 1.60 2.40 3.10 3.90 7.2 4.7 8.6 6.9 13.8 8.6 17.3 25.9 30.2 34.6 38.9 43.2 47.5 51.8 34 1.60 2.40 3.20 4.00 7.4 4.9 8.9 7.1 14.2 8.9 17.8 26.7 31.2 35.6 40.1 44.5 49.0 53.4 35 1.70 2.50 3.30 4.20 7.6 5.0, 9.2 7.3 14.7 9.2 18.3 27.5 32.1 36.6 41.2 45.8 50.4 55.0 36 1.70 2.60 3.40 4.30 7.95.19.47.5 15.19.4 18.8 28.3 33.0 37.7 42.4 47.151.8 56.5 "S" and "D" refers respectively to Single and Double Leather Belts; while “Ply" refers to Rubber Belting. Rim speed should not exceed 5000 feet per minute for standard pulleys. To find rim speed, multiply diameter of pulley in feet by 3.1416 and again by the revolutions of the pulley. Continued Calculations based on Pulleys Running at 100 R. P. M. 19.3 38.5 24.1 48.2 72.3 84.3 25.7 51.3 77.0 89.8 102.6 115.5 128.3 141.1 154.0 96.4 108.4 120.5 132.5 144.5 98.4 110.7 123.1 135.4 147.7 Pulleys should be located sufficient distance apart to insure a slight sag in slack side of belt. To insure long life of belt, care should be taken that shafting and pulleys are properly aligned and that there is sufficient clearance to outside objects. |